|
NiTiNOL 60, or 60 NiTiNOL, is a Nickel Titanium alloy (nominally Ni-40wt% Ti) discovered in the late 1950s by the U. S. Naval Ordnance Laboratory (hence the "NOL" portion of the name NiTiNOL). Depending upon the heat treat history, 60 NiTiNOL has the ability to exhibit either superelastic properties in the hardened state or shape memory characteristics in the softened state. Producing the material in any meaningful quantities, however, proved quite difficult by conventional methods and the material was largely forgotten. The composition and processing parameters have recently been revived by Summit Materials, LLC under the trademarked name SM-100. SM-100 maintains 60 NiTiNOL's unique combination of superb corrosion resistance (terms it "Corrosion Proof"〔DellaCorte, 2010, "Nickel-Titanium Alloys: Corrosion Proof Alloys for Space Bearing, Components and Mechanism Applications", NASA-2010-216334〕 ) and equally impressive wear and erosion properties. In bearing lifing tests conducted by NASA, SM-100 has been shown to have over twice the life of 440C stainless steel and over ten times the life of conventional titanium alloys with a significantly lower coefficient of friction.〔DellaCorte, 2009, "Intermetallic Nickel-Titanium Alloys for Oil-Lubricated Bearing Applications", NASA-2009-215646〕 The superelastic nature of the material gives it the ability to withstand compression loading of well over with no permanent yielding. The main applications for SM-100 thus far appears to be bearings and high-end knives. The following table compares 60 NiTiNOL against commonly used bearing materials.〔 ==References== 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Nitinol 60」の詳細全文を読む スポンサード リンク
|